- S. D. Rajan,
B. Mobasher, S-Y. Chen and C. Young, 1999, Cost-Based Design of
Residential Steel Roof Systems: A Case Study, Structural Engineering
and Mechanics, Vol. 8, No. 2, pp165-180.
- S-Y. Chen,
J. Situ, B. Mobasher and S. D. Rajan, 1996, Use of Genetic Algorithms
for the Automated Design of Residential Steel Roof Trusses, Advances
in Structural Optimization-Proceedings of the First U.S.-Japan Joint
Seminar on Structural Optimization, ASCE Press, New York, pp. 43-54.
- Y.C. Cho, S.Y.
Chen and Y.L. Huang, “Application of Finite Element Methods for the
Analysis of Automotive Disc Brake Caliper”, the 28th Conference on Theoretical
and Applied Mechanics, October 2004, Taiwan.
- S-Y. Chen,
Oct, 2002, “Using Explicit Finite Element Analysis for Structural
Impact Analysis – From Simple Calibration to the Concept of Virtual
Lab Technology”, 2002 .
- S-Y. Chen,
May 2000, "Using Explicit FE Analysis for Structural Analysis of
Impact : From simple Calibrations to Very Complicated Models", Presented
in the Fourth FAA Uncontained Engine Debris Characterization Modeling
and Mitigation Workshop, Stanford Research Institute (SRI) International,
California, USA.
- S-Y. Chen,
B. Mobasher and S. D. Rajan, Nov. 99, "Automated Design of Steel
Trusses”, Accepted by the 15th International Specialty Conference
on Cold-Formed Steel Structures for presentation, October 2000, St.
Louis, MO.
- S-Y. Chen and
S. D. Rajan, May 99, " Using Genetic Algorithm as An Automatic Structural
Design Tool", Short Paper Proceedings of 3rd World Congress
of Structural and Multidisciplinary Optimization, Vol. 1, pp263-265,
Buffalo, NY.
- S. D. Rajan
and S-Y. Chen, July 98, "An Interactive Tool for Teaching Multiobjective
Design Optimization", Proceedings of SEI-ASCE 13th Conference on
Analysis and Computation, Structural Engineering World Congress,
San Francisco.
- S. D. Rajan,
B. Mobasher, S-Y. Chen and C. Young, March 1997, Optimized Design
of Residential Steel Roof Systems : A Case Study Involving Genetic
Algorithm and Fullscale Testing, Conference on Optimization in Industry,
Palm Coast, Florida.
- S. D. Rajan
and S-Y. Chen, July 98, "An Interactive Tool for Teaching Multiobjective
Design Optimization", Proceedings of SEI-ASCE 13th Conference on
Analysis and Computation, Structural Engineering World Congress,
San Francisco.
- Anton Liu and
Shen-Yeh Chen, June, 2001 “TFE731-20/40 Planet Carrier Simulated Blade-Out
Test Report”, Internal Report, Honeywell Engines and Systems, Phoenix,
Arizona, USA.
- S-Y. Chen,
Feb 2001, " Explicit Finite Element Analysis Modeling of Multi-Layer
Composite Fabric for Gas Turbine Engines Containment Systems ",
Proposal to FAA for Honeywell/FAA/SRI/NASA/ASU Joint Research, Honeywell
Engines and Systems, Phoenix, Arizona, USA.
- S-Y. Chen,
Dec 2000, " AS907 LS-DYNA Full Engine Fan Blade-Out Analysis : Conclusion
With Hardware Test", Internal Report, Honeywell Engines and Systems,
Phoenix, Arizona, USA.
- S-Y. Chen,
Nov 2000, "F124 Inner Combustor Housing Stiffener Sensitivity Study",
Internal Report, Honeywell Engines and Systems, Phoenix, Arizona,
USA.
- S-Y. Chen,
Oct 2000, "F124 Inner Combustor Housing Cost Reduction redesign Axial
Stiffness and Stress Test", Internal Report, Honeywell Engines and
Systems, Phoenix, Arizona, USA.
- S-Y. Chen,
Sep 99, "Using LS-DYNA for Crashworthiness and Impact Structure
Analysis, An In-House Manual", Internal Manual, Honeywell Engines
and Systems, Phoenix, Arizona, USA.
- S-Y. Chen,
Oct 99, "AS907 Phase 2 LS-DYNA Full Engine Fan Blade-Out Analysis",
Internal Report, Honeywell Engines and Systems, Phoenix, Arizona,
USA.
- S-Y. Chen,
Oct 99, "AS907 Phase 2 Trailing Blade Failure Analysis Using LS-DYNA",
Internal Report, Honeywell Engines and Systems, Phoenix, Arizona,
USA.
- S-Y. Chen,
May 2000, "AS907 LS-DYNA Full Engine Fan Blade-Out Analysis : Conclusion
with Hardware Test", Internal Report, Honeywell Engines and Systems,
Phoenix, Arizona, USA.
- S-Y. Chen,
June 99, "CTP800 Ballistic Shield Design Optimization, Part I :
Crashworthiness Optimization Procedure and Preliminary Optimal
Design", Internal Report, Honeywell Engines, Phoenix, Arizona, USA.
- S-Y. Chen,
June 99, " CTP800 Ballistic Shield Design Optimization, Part II : Improvement
of Preliminary Optimal Design", Internal Report, Honeywell Engines,
Phoenix, Arizona, USA.
- S-Y. Chen,
1994, Introduction to the Application of Nonlinear Programming Methods
for Automatic Structural Design, Annual Report, Hsichi Wuku Freeway
Widening Construction Office, Taiwan Area National Freeway Bureau.
- S-Y. Chen,
Oct 2000, “Integrating ANSYS with Modern Numerical Optimization Technologies”,
ANSYS Solutions Magazine, Spring Issue, 2003.
- S-Y. Chen,
December 1997, Using Genetic Algorithms for the Optimal Design of
Structural Systems, Dissertation for Doctor of Philosophy, Department
of Civil Engineering, Arizona State University.
- S-Y. Chen,
1993, Design Optimization of Trusses Exhibiting Geometric and Material
Nonlinearity, Thesis for Master of Science Degree, Department
of Civil Engineering, Arizona State University.
- S-Y. Chen,
Finite Element Method with ANSYS : Industrial Product Reliability Analysis,
2004, Chuen Hwa Publication, Taiwan.
- S-Y. Chen,
2003, "Integrating ANSYS with Modern Numerical Optimization Technologies",
ANSYS Solutions Magazine, Spring Issue, 2003.
- S-Y. Chen,
1993, Design Optimization of Trusses Exhibiting Geometric and Material
Nonlinearity, Thesis for Master of Science Degree, Department
of Civil Engineering, Arizona State University.
|
